Extend the latch south wap cricket game to pressure cooker manual mirro its maximum length to make installing the car seat base 3d sex villa cracked hentai easier.
Adjust the foot of the car seat base to level the base on the vehicle seat.
Tighten the latch until the Graco Snugride car seat base cannot be moved more than 1 inch in any direction.Installing a Graco Snugride infant car seat base correctly is essential to the overall safety and function of the car seat.Once you have installed the car seat base, ask a car seat technician at your local fire station, police station or hospital to inspect it to ensure that you have completed the installation correctly.Tug on the latch to make sure they are secure.If the Graco Snugride car seat base is not level, readjust the foot of the car seat base.Locate the latch connectors in your vehicle.Always place your infant in a rear-facing position.The level indicator will read all blue if the Graco Snugride is level.
Reinspect the car seat base to determine whether the seat is now level.
Make sure the belt is not twisted.
Pull the foot down one notch.Thread the vehicle seat belt through the opening in the car seat base, making sure that the belt goes under the tongue of the car seat base.Never put two latch connectors onto one vehicle latch unless your vehicle's manufacturer indicates that it is allowed.You can install a car seat base one of two ways: by using the vehicle seat belt in older cars or by employing the latch (lower anchors and tethers for children) system in newer models.Tighten the vehicle seat belt so the car seat base does not move more than 1 inch in any direction.